Your benefits

  • Standard part turned into a bespoke solution
  • All you have to do is fit the finished part

Milling and broaching of splines and PTO shaft profiles

Our Technical Services team can carry out a variety of machining procedures for you, including hobbing, broaching and honing. We have facilities for milling and broaching various spline teething and PTO shaft profiles. Examples include the 6-part 1-3/8" profile and the 6-part 1-3/4" profile in accordance with the DIN 9611A standard agricultural profile.


Spline teething

We can also produce other types of spline teething for you. Our machinery is even able to produce a complete spline over a distance of up to 400mm. Other sizes are module 1.6 to 2.5 in accordance with DIN 5485 – 5480 and module 16–32.


Internal profiles

For internal profiles we can supply the most commonly used mandrels. We have shafts in steel types C45 — 42CHMO4 — st 53-3 and 16MN and in various lengths. We can also make parts based on drawings supplied by you.

  • Various types of spline teething and PTO shaft profiles.
  • Examples include the 6-part 1-3/8'' profile and the 6-part 1-3/4'' profile (in accordance with the DIN 9611A standard agricultural profile).
  • Complete spline over a distance of up to 400 mm.
  • For internal profiles we can supply the most commonly used mandrels.
  • We can also carry out machining based on drawings supplied by you.

Would you like further information?

For any questions about your machining options, please contact your account manager at Kramp.

Download the pdf with all our technical services.