B.P. - MEC II / 540 rpm driven reel compressor

Scroll over item groups
Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Specifications
  • The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
  • MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
  • MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
  • A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Benefits
  • Minimum repair costs thanks to the unique automatic protection system
  • As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Application
The MEC II S.C. version has been specially developed as a compressor to completely empty hose reels
Properties
The MEC II S.C. version can create positive pressure up to a maximum of 4 bar
Consists of
  • The S. C. version features a forced lubrication system
  • Including PTO shaft cover
  • The pumps are delivered without lubrication oil (item BP5070)
Technical information
  • Composition of the item numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, SC = reel compressor
  • Reel compressors are equipped with a forced lubrication system that is set using dripper nozzles
  • The lubrication system must be checked at all times to ensure proper function
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Browse to media

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times

Media (1)