Motor Security MB704-H

Scroll over item groups
Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Specifications
  • Easy wiring and small installation size (66 x 66 mm)
  • With start delay
  • All inputs are switched to earth
Benefits
  • Easy to install
  • A bypass switch is not required
  • User friendly
Application
  • For industrial use on mobile and stationary machines
  • For monitoring oil pressure, temperature, dynamo charging etc.
  • For water pumps, power units, compressors, joint cutters, bush hammers and choppers
  • For cooling, heating and hydraulic equipment
  • For tractors, trucks, construction and agricultural machinery
Properties
  • Inputs for oil-pressure switches, temperature switches, dynamo D+, dynamo W, stop-in and auxiliary port, e.g. for water pump pressure switch
  • Outputs for solenoid switches, 40 A induction coil and 3.5 A stop coil, alarm, switching voltage (15) and start (50)
  • Errors are stored and indicated with a red LED
  • After an error has occurred the engine is switched off after 3 seconds and the external output is activated
  • If the same error occurs more than once and for more than 3 seconds in total, the engine will be switched off subsequently
  • If no more active errors occur within 10 seconds, the memory contents will be deleted
  • Other inputs will be locked, so the source of the error can be found at any time
  • During normal operation the engine can be switched off at any time
  • Assembly with vibration dampers or U-brackets
Technical information
  • The sensors specified in the diagram must be used
  • Attention: keyswitch position 1 has a test function
  • Use position 2 (short term) to activate engine protection
  • If position 2 is not used, the engine will switch off after 6 seconds

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times