Print
Rod ends series GIR.. DO
Browse to product table
Interested in buying products?
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!
- Tailored advice from our specialists
- More than 500.000 products
- Up-to-date information on current stock and delivery times
| Application range |
| |
|---|---|---|
| Properties |
| |
| Technical info | Upward of 25mm bore nipple screwed in |
Interested in buying products?
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!
- Tailored advice from our specialists
- More than 500.000 products
- Up-to-date information on current stock and delivery times
Product | Unit | Hole diameter d | Hole length B | Bearing outside diameter D | Outside diameter of inner ring D1 | Edge angle ß | Base outside diameter W | Height base L5 | Shaft to center distance L7 | Shaft diameter D4 | Thread diameter D3 | Thread pitch | Thread direction | Thread length L3 | Hole centre to bottom distance H1 | Head width (hole length) C1 | Total height L4 | Surface treatment | Additional info |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Each | 8 mm | 8 mm | 16 mm | 10,2 mm | 15 ° | 14 mm | 5 mm | 14 mm | 12,5 mm | M8 | 1.25 mm | Right | 15 mm | 36 mm | 6 mm | 48 mm | Zinc-plated | ||
| Each | 10 mm | 9 mm | 19 mm | 13,2 mm | 12 ° | 17 mm | 6,5 mm | 15 mm | 15 mm | M10 | 1.50 mm | Right | 20 mm | 43 mm | 7 mm | 57,5 mm | Zinc-plated | ||
| Each | 12 mm | 10 mm | 22 mm | 14,9 mm | 11 ° | 19 mm | 6,5 mm | 18 mm | 17,5 mm | M12 | 1.75 mm | Right | 23 mm | 50 mm | 8 mm | 67 mm | Zinc-plated | ||
| Each | 15 mm | 12 mm | 26 mm | 18,4 mm | 8 ° | 22 mm | 8 mm | 20 mm | 21 mm | M14 | 2.00 mm | Right | 30 mm | 61 mm | 10 mm | 81 mm | Zinc-plated | ||
| Each | 17 mm | 14 mm | 30 mm | 20,7 mm | 10 ° | 27 mm | 10 mm | 23 mm | 24 mm | M16 | 2.00 mm | Right | 34 mm | 67 mm | 11 mm | 90 mm | Zinc-plated | ||
| Each | 20 mm | 16 mm | 35 mm | 24,1 mm | 9 ° | 32 mm | 10 mm | 27 mm | 27,5 mm | M20 | 1.50 mm | Right | 40 mm | 77 mm | 13 mm | 103,5 mm | Zinc-plated | ||
| Each | 25 mm | 20 mm | 42 mm | 29,3 mm | 7 ° | 36 mm | 12 mm | 32 mm | 33,5 mm | M24 | 2.00 mm | Right | 48 mm | 94 mm | 17 mm | 126 mm | Zinc-plated | ||
| Each | 6 mm | 6 mm | 14 mm | 8 mm | 13 ° | 11 mm | 5 mm | 12 mm | 10 mm | M6 | 1.00 mm | Right | 11 mm | 30 mm | 4,4 mm | 40,5 mm | Zinc-plated | Right Hand | |
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
| ||||||
