Support
Log in
Print

Wide-angle CV PTO drive shafts 80° series WW 2580 / 80° (inner)

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account
Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Long description
Wide-angle PTO shaft assembly 80° series WW 2580 / 80° (male) suitable for wide spreader, fertiliser machine, big baler and silage wagon etc.
Product details
  • Half PTO shaft with guard
  • Declaration of conformity
  • User instructions
  • Supplied without yoke and cross piece
  • Lubricating interval of 8 hours
  • Meets the requirements according to EC 89/392 EEC
  • Meets safety standard EN12965
  • Provided with "CE" marking
  • Angle in continuous use maximum 25º
  • Angle may be 80º only briefly
  • Max. dyn. power 540 rpm: 66kW - 1175Nm
  • Max. dyn. power 1000 rpm: 102kW - 975Nm
  • Values at bending angle 10° and service life 1000 hours
Application range
  • Broad spreader
  • Slurry wagon
  • Big baler
  • Silage wagon
Properties
  • Lubrication interval: 8 hours
  • Fulfilling the requirements laid out in EC 89/392 EEC
  • Compliant with EN12965 safety standard
  • CE marking available
Consists of
  • PTO half shaft with shielding
  • Declaration of conformity
  • Instruction manual
  • Supplied without yoke and joint cross
Technical info
  • Working angle with continuous use maximum 25º
  • Working angle may only briefly be 80º
  • Max. dynamic capacity 540 rpm: 66 kW, 1175 Nm
  • Max. dynamic capacity 1000 rpm: 102 kW, 975 Nm
  • Values at working angle 10° and service life 1000 hours
Includes
  • Half PTO shaft with guard
  • Declaration of conformity
  • User instructions
  • Supplied without yoke and cross piece
Browse to media

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account
Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Product
Unit

Consists of

Locking type by tractor side

Size code

Length

Cross joint bush diameter by tractor side - longer part

Cross joint bush diameter by tractor side

Cross joint length by tractor side - longer part

Cross joint length by tractor side

Cross joint bush diameter by machine side - longer part

Cross joint bush diameter by machine side

Cross joint length by machine side - longer part

Cross joint length by machine side

Inner tube profile

Protection type

Original number equivalent

Additional info

WWZ25801210IOG
Walterscheid
Each
PTO half shaft with shielding / Declaration of conformity / Instruction manual / Supplied without yoke and joint cross
Wide angle without UJ
WW 2580
1014 mm
32 mm
36 mm
106 mm
89 mm
32 mm
36 mm
106 mm
89 mm
S4GA
SD25
1113199
*Please note that this item is either a dangerous good or a non-standard delivery size. This means a specialist carrier will be used and this item will take upto 48 hours to deliver.
Walterscheid
Consists of
Locking type by tractor side
Size code
PTO half shaft with shielding
Declaration of conformity
Instruction manual
Supplied without yoke and joint cross
Wide angle without UJ
WW 2580

Media (1)