rørholdere enkelt svær RS-ZPA polyamid

Vis produkttabeller

Interesseret i at købe produkter?

Er du forhandler/erhvervsdrivende har du mulighed for at oprette en konto hos Kramp, så du kan se priser og bestille direkte fra webshoppen. På kramp.com sælger vi dog ikke direkte til landmænd, private o. lign., her henviser vi i stedet til en forhandler nær dig.

  • Rådgivning fra vores eksperter
  • Dag-til-dag levering
  • Mere end 500.000 varenr.
Fordele
  • Lang holdbarhed
  • Forebyg skader eller kvæstelser
Produktoplysninger
  • Rifflet indvendig overflade
  • God UV-bestandighed
  • Materiale: Polyamid
  • Olie og benzinbestandig
  • Afrundede kanter
  • Polypropylen
  • P001: 1 clamp
  • P005: 5 clamps
  • P025: 25 clamps
Omfatter
  • Hver clamp består af:
  • 2 halve
  • Dækplade
  • bundplade
  • Tilhørende bolte

Interesseret i at købe produkter?

Er du forhandler/erhvervsdrivende har du mulighed for at oprette en konto hos Kramp, så du kan se priser og bestille direkte fra webshoppen. På kramp.com sælger vi dog ikke direkte til landmænd, private o. lign., her henviser vi i stedet til en forhandler nær dig.

  • Rådgivning fra vores eksperter
  • Dag-til-dag levering
  • Mere end 500.000 varenr.
Produkt
Enhed

Diameter

Diameter

Materiale

Gruppekode

DIN-standard

Bredde

B

Højde

C

Monteringsplade bredde

Hulafstand

Boltgevinddiameter

Boltlængde

Min. arbejdstemperatur

Maks. driftstemperatur

Farve

Farve

Montering

Størrelse

Styk
6 mm
0.236-0.236 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
8 mm
0.314-0.314 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
10 mm
0.393-0.393 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
12 mm
0.472-0.472 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
14 mm
0.551-0.551 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
15 mm
0.59-0.59 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
16 mm
0.629-0.629 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
18 mm
0.708-0.708 Inch
Polyamid
1
3015/2
56 mm
32 mm
55 mm
33 mm
M10
40 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
1 Inch
Styk
20 mm
0.787-0.787 Inch
Polyamid
2
3015/2
71 mm
48 mm
70 mm
45 mm
M10
60 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
2 Inch
Styk
22 mm
0.866-0.866 Inch
Polyamid
2
3015/2
71 mm
48 mm
70 mm
45 mm
M10
60 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
2 Inch
Styk
25 mm
0.984-0.984 Inch
Polyamid
2
3015/2
71 mm
48 mm
70 mm
45 mm
M10
60 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
2 Inch
Sæt
28 mm
1.102-1.102 Inch
Polyamid
2
3015/2
71 mm
48 mm
70 mm
45 mm
M10
60 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
2 Inch
Styk
30 mm
1.181-1.181 Inch
Polyamid
3
3015/2
86 mm
60 mm
85 mm
45 mm
M10
70 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
3 Inch
Styk
35 mm
1.377-1.377 Inch
Polyamid
3
3015/2
86 mm
60 mm
85 mm
60 mm
M10
70 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
3 Inch
Styk
38 mm
1.496-1.496 Inch
Polyamid
3
3015/2
86 mm
60 mm
85 mm
60 mm
M10
70 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
3 Inch
Styk
42 mm
1.653-1.653 Inch
Polyamid
3
3015/2
86 mm
60 mm
85 mm
60 mm
M10
70 mm
-40 °C
120 °C
Sort
Black
1. upper and lower jaws are the same, so mistaking one for the other is impossible / 2. the sub-plate should be placed on a stable base / 3. pipe clamps should be mounted with a distance of 1,2m between them, if possible / 4. in case of pipe bends the brackets should be mounted immediately behind the bend
Vis mere
3 Inch
Diameter (millimetre)
Diameter (inch)
Materiale
6
0.236-0.236
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
8
0.314-0.314
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
10
0.393-0.393
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
12
0.472-0.472
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
14
0.551-0.551
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
15
0.59-0.59
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
16
0.629-0.629
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
18
0.708-0.708
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
20
0.787-0.787
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
22
0.866-0.866
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
25
0.984-0.984
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
28
1.102-1.102
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
30
1.181-1.181
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
35
1.377-1.377
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
38
1.496-1.496
Polyamid
Diameter (millimetre)
Diameter (inch)
Materiale
42
1.653-1.653
Polyamid