GR30 Rotator 30kN Shaft 49,5mm Hole

Application:
- Adaptable for nearly every type of loading crane
- Commercial vehicles
- Forestry

Benefits:
- Endless rotation

Details:
- Grapple rotator

Properties:
- Axial load 1 to 16 tonnes
- Cheaper standard rotator
- Vane motor principle
- 2 oil feedthroughs for grabber open/closed

Technical information:
- GR = Grapple Rotator, only for axial loads
- GR-DB = Grapple Rotator Double Bearing, for both axial and radial loads

Part number GR30
Description Application:
- Adaptable for nearly every type of loading crane
- Commercial vehicles
- Forestry

Benefits:
- Endless rotation

Details:
- Grapple rotator

Properties:
- Axial load 1 to 16 tonnes
- Cheaper standard rotator
- Vane motor principle
- 2 oil feedthroughs for grabber open/closed

Technical information:
- GR = Grapple Rotator, only for axial loads
- GR-DB = Grapple Rotator Double Bearing, for both axial and radial loads
Unit Each
Specifications - Grapple rotator
Benefits - Endless rotation
Application - Adaptable for nearly every type of loading crane
- Commercial vehicles
- Forestry
Properties - Axial load 1 to 16 tonnes
- Cheaper standard rotator
- Vane motor principle
- 2 oil feedthroughs for grabber open/closed
Technical information - GR = Grapple rotator only for pulling axial loads.
- GR-DB = Grapple rotator with double bearing for both pulling and pushing axial loads.
Long description Application:
- Adaptable for nearly every type of loading crane
- Commercial vehicles
- Forestry

Benefits:
- Endless rotation

Details:
- Grapple rotator

Properties:
- Axial load 1 to 16 tonnes
- Cheaper standard rotator
- Vane motor principle
- 2 oil feedthroughs for grabber open/closed

Technical information:
- GR = Grapple Rotator, only for axial loads
- GR-DB = Grapple Rotator Double Bearing, for both axial and radial loads
Torque Nm 900-1000 N·m
Working pressure max. 250 BAR
Mounting (Bottom side) ash 49,5mm, hole 25mm
Attachment hole 25 x 60 mm
Working pressure max. 25 MPa
Oil connection 4 Inch
Connection size 3/8 Inch
Flow rate 20 l/min
Working ports (BSP) G 3/8 Inch
Pressure 250 BAR
Weight 15-18 kg
Limit of stresst 30 kN
Axial load dynamic max. 15 kN
Rotation direction arbitrary
Axial load static max. 30 kN
Rotator mounting hole 25 x 60 mm
Axial force max. 3,000 kg
Recommended flow rate 20 l/min
Tool mounting roller 49.5 mm, opening 25 mm
  • Kramp Technical Service Engineering
    ×
  • Technical Service Hydraulics
    ×

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500, 000 products
  • Next-day delivery*