MEC8000DL Vacuum pump direct drive CCW B.P.

Part number MEC8000DL
Unit Each
Specifications - Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
Benefits - As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Application - These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties - These pumps can generate both positive pressure and vacuum
Consists of - These pumps are supplied with standard vanes. Long-life vanes available on request
- Without pressure relief valve and vacuum valve
- The pumps are delivered without lubrication oil (item BP5070)
- Including PTO shaft cover
Technical information - Composition of the item numbers: MEC = series, 8000 = type, D = direct drive 1000 rpm, L = anti-clockwise rotation, A = automatic lubrication
- On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
- On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
- In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
- Directly driven pumps (DL) must be driven anti-clockwise. Clockwise rotation available on request
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
- Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Distance holes 252 mm
Distance underside to center shaft 164 mm
Flow max. 8100 l/min
Vacuum max. 0.9 BAR
Power requirement by max. vacuum 15 kW
Weight 135 kg
Connection safety valve 1 1/2 in
A Length 730 mm
G Distance 2nd bore to end 170 mm
E Distance end of shaft to mid first bore 308 mm
F Distance holes 252 mm
H Bore diameter 15 mm
K Distance center shaft to left side 195 mm
X Distance center shaft to right side 215 mm
B Width 410 mm
C Height 597 mm
L Distance underside to center shaft 164 mm
Rotation max. 1400 r/min
I Distance bore width 227 mm
D Hose end 80 mm
P max. (bar) 1.5 BAR
Drive shaft (inch) 1 3/8 in

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500, 000 products
  • Next-day delivery*
 Scroll over item groups