MEC8000H

B.P. Pump MEC... H hydraulic driven

Scroll over item groups
MEC8000H
Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • Next-day delivery*
  • More than 500.000 products
Specifications
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Application
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Consists of
  • These pumps are supplied with standard vanes. Long-life vanes available on request
  • Without pressure relief valve and vacuum valve
  • The pumps are delivered without lubrication oil (item BP5070)
  • Including hydraulic base for mounting the hydraulic motor
  • Without hydraulic motor and key bush
Technical information
  • Composition of the part numbers: MEC = series, 8000 = type, H = hydraulic drive
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Hydraulically driven pumps rotate clockwise. Anti-clockwise rotation available on request
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • Next-day delivery*
  • More than 500.000 products
ProductUnit
Bore diameter
H
Connection safety valve
Distance 2nd bore to end
G
Distance bore width
I
Distance center shaft to left side
K
Distance center shaft to right side
X
Distance end of shaft to mid first bore
E
Distance holes
F
Distance underside to center shaft
L
Height
C
Connection
D
Hydraulic motor capacityHydraulic motor connection
Length
A
Flow max.Pressure max.Rotation max.Power requirement by max. pressurePower requirement by max. vacuumPump capacityVacuum max.Weight
Width
B
Distance flange to mid first bore
Each
15 mm
1 1/4 Inch
90 mm
227 mm
164 mm
178 mm
194 mm
172 mm
142 mm
480 mm
45 mm
38.5 l/min
3
456 mm
2750 l/min
1.5 BAR
1400 r/min
7 kW
4.9 kW
165 m³/h
0.9 BAR
69 kg
342 mm
Each
15 mm
1 1/2 Inch
153 mm
227 mm
195 mm
215 mm
253 mm
189 mm
164 mm
597 mm
60 mm
63.5 l/min
3.5
595 mm
6150 l/min
1.5 BAR
1400 r/min
15 kW
10 kW
369 m³/h
0.9 BAR
123 kg
410 mm
Each
15 mm
1 1/2 Inch
156 mm
227 mm
195 mm
215 mm
257 mm
252 mm
164 mm
597 mm
60 mm
63.5 l/min
3.5
665 mm
7000 l/min
1.5 BAR
1400 r/min
19 kW
12 kW
420 m³/h
0.9 BAR
141 kg
410 mm
239 mm
Each
15 mm
1 1/2 Inch
196 mm
227 mm
195 mm
215 mm
287 mm
252 mm
164 mm
597 mm
80 mm
63.5 l/min
3.5
735 mm
8100 l/min
1.5 BAR
1400 r/min
22 kW
15 kW
486 m³/h
0.9 BAR
153 kg
410 mm
279 mm
Bore diameter (millimetre)
Connection safety valve (inch)
Distance 2nd bore to end (millimetre)
15
1 1/4
90
Bore diameter (millimetre)
Connection safety valve (inch)
Distance 2nd bore to end (millimetre)
15
1 1/2
153
Bore diameter (millimetre)
Connection safety valve (inch)
Distance 2nd bore to end (millimetre)
15
1 1/2
156
Bore diameter (millimetre)
Connection safety valve (inch)
Distance 2nd bore to end (millimetre)
15
1 1/2
196