60191416 Bore hole pump S4 3/19 1.5HP 230V

Part number
Long description
These multi-stage well pumps with oil-filled DAB motors are capable of supplying a wide range of water volume. For pumping water, extracting water from below ground, gardening and irrigation in civil and commercial applications (fire extinguishing, washing installations) and for moving water in agricultural operations. The pump has an integrated suction filter, stainless steel cable cover, mechanical carbon/ceramic seal and Technopolymer impellers accommodated in the housing with stainless steel adjustment rings. The impellers have been designed to ensure a high efficiency level. The pump enclosure is connected to a 40L two-pole asynchronous motor. All parts that are in contact with water are made from AISI304L stainless steel. The pump has a removable cable connector and is suitable for use with inverters.
Show more
  • High-quality well pump
  • Package ready for use
  • Suitable for long-term use
  • Suitable for smaller wells
Product Details
  • In accordance with Directive 2009/125/EC (Ecodesign - ErP) with an MEI index of ≥ 0.4 for the entire range
  • Removable cable connector with ACS, WRAS and KTW certified cable
  • Suitable for use with 30 Hz - 50 Hz inverters
  • Pump enclosure, head piece and intermediate flange made from stainless steel
  • The cooling and lubrication of the bearings uses a special fluid which is approved for use with food
  • Maximum sand content 150g/m³
  • Pumped liquid must be clean, free of waste components and chemically neutral
The pump is supplied with a 15, 30 or 40 metre cable (depending on type), nylon cord and 'control box' (220V version) The control box contains the capacitor for the well pump. Note: the control box is not responsible for automatic activation/deactivation of the pump on water intake. If you would like the DAB S4 well pump to switch on automatically when a tap in the line is opened, the pump can be equipped with the DAB Active Driver. See the available accessories for this pump.
Show more
Max. volume flow rate
4,2 m³/h
Nominal volume flow rate
3 m³/h
Cable length
40 m
Rated voltage
0-230 V
50 Hz
Nominal current
8,5 A
Max. medium temperature (continuous)
40 °C
Min. medium temperature (continuous)
0 °C
Max delivery height
105 m
Thread type of suction side connection
Thread diameter of suction side connection
1-1/4 Inch
Total length
1093 mm
Power consumption
1,1 kW
Motor power output (P2)
1,1 kW

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times