Part number | DNR2550M | |
---|---|---|
EAN | 8716106692590 | |
Unit | Each | |
Type | Double acting | |
OBore diameter | 25 mm | |
BRod diameter | 10 mm | |
Stroke | 50 mm | |
R Min. length | 190 mm | |
V Min. mounting holes distance | 104 mm | |
Mounting diameter (width) - cylinder connection | 22 mm | |
Damping type | Pneumatic - both sides - adjustable | |
Rod material | Stainless steel 303 | |
Sealing material | Polyurethane | |
Cylinder material | Stainless steel 304 | |
Min. working pressure | 1 BAR | |
Max. working pressure | 10 BAR | |
Theoretical force at 6 bar pressure - advancing | 265 N | |
Theoretical force at 6 bar pressure - retracting | 218 N | |
ISO standard |
| |
CETOP Code | RP52P | |
Cylinder head material | Die-cast alloy | |
TCylinder head flange diameter | 30 mm | |
ECylinder head length | 28 mm | |
CHousing front mounting holes thread diameter | M22 | |
Housing front mounting holes thread pitch | 1.50 mm | |
KOutside diameter | 26,5 mm | |
Cylinder inside material | Bronze | |
Piston material | Brass | |
LCylinder nut width | 8 mm | |
SW2Cylinder nut wrench size | 27.0 mm | |
SW1Rod wrench size | 9.0 mm | |
NMounting length - rod connection | 22 mm | |
M Cylinder length without rod and head | 68 mm | |
Min. length without rod connection length | 118 mm | |
Mounting type - cylinder connection | Thread | |
Mounting thread type - cylinder connection | G | |
Mounting thread diameter - cylinder connection | 1/8 Inch | |
Mounting thread type - rod connection | Metric | |
Mounting thread type - male/female - rod connection | Male | |
AMounting thread diameter - rod connection | M10 | |
Mounting thread pitch - rod connection | 1.25 mm | |
WMounting hole center to head end distance | 12 mm | |
FMounting head length | 22 mm |
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!