Support
Log in
Print

CR75A

Part number
CR75A
EAN
Unit
Metre
Qty. Rounding
0.01
Details
Plastic hydraulic hose with 1 layer of high-strength synthetic fibre mesh
Application range
  • Medium pressure hydraulic systems
  • Forklifts
  • Lifting platforms
  • Hose reels
  • Mineral oil-based and glycol-based fluids
  • Vegetable and mineral lubricants
  • Crude oils, coolant, compressed air
Properties
  • Light, thin hose for relatively high operating pressure
  • Very low bending radius
  • Oil-resistant, smooth outer coating
  • Thermoplastic hose
Technical info
  • Temperature for mineral oil based liquids: -40°C to +100°C
  • Temperature for synthetic hydraulic fluids and water-based liquids: -40°C to +57°C
  • Available lengths: by the metre
Benefits
  • Light, thin and flexible hose for relatively high operating pressure
  • Precisely co-ordinated pressure and return flow
Hose inside diameter
3/16 Inch
Hose inside diameter
5 mm
Max working pressure
210 BAR
Material inside
Polyester
Bend radius
25 mm
Weight
0.06 kg/m
Type
Hydraulic high pressure hose
DN
5 mm
Hose outside diameter
9.6 mm
Hose outside diameter
0.38 Inch
Max working pressure
3000 lbf/in²
Burst pressure
840 BAR
Burst pressure
84 MPa
Burst pressure
12000 lbf/in²
Medium
Hydraulic oil
Max working temperature
100 °C
Max. working temperature
212 °F
Min working temperature
-40 °C
Min. working temperature
-40 °F
Material outside
Polyurethane
Reinforcement type
Braid
Reinforcement material
Textile
Weight
0.05 lb/ft
Bend radius
0.98 Inch
EN standard
855 R7
Crimping diameter range
11.9-12.1 mm
Original number equivalent
1000290