Support
Log in
Print

Mini power packs, 24 VDC

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account
Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Pros
  • Multi-purpose
  • Universal assembly
  • Short delivery time
Product details
  • Yield and current draw are load dependent
  • Not applicable in pressureless circulation pump situations
  • Designed for short-term and or intermittent operation
  • Consider the maximum duty cycle and minimum pause time
  • Consists of a press and return connection with female thread 1/4" BSP
  • Optionally expandable with NG6 valve
  • Adjustable pressure relief valve
  • Check valve in P
  • Tested and set to maximum pressure
  • Voltage: 24V DC
  • The following values apply at an operating pressure of 180 bar and an ambient temperature of 20°C:
  • Q = 3.6 l/min
  • Maximum duty cycle of DC motors depends on load.
  • Cooling time approx. 20 min.
  • Current consumption = 80 ampères
  • Other versions can be supplied on request
  • Configure your own hydraulic aggregate with the Kramp calculation and drawing program
  • The software can be downloaded from our website, see downloads at the bottom of each web page
Includes
  • Aggregate
  • Generate maintenance and operating instructions
  • EC declaration of conformity
  • Circuit diagram

Interested in buying products?

Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!

Request account
Find a Kramp dealer
  • Tailored advice from our specialists
  • More than 500.000 products
  • Up-to-date information on current stock and delivery times
Product
Unit

Tank capacity

Nominal volume flow rate

Max continous working pressure

Thread diameter of delivery side connection

Total length

Total width

Total height

MPP01002
Kramp
Each
8 l
1,2 cm³/rev
210 BAR
1/4 Inch
661 mm
235 mm
222 mm
Kramp
Tank capacity (litre)
Nominal volume flow rate (centimetre cubed per Rev)
Max continous working pressure (bar)
8
1,2
210