Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!
Technical info | Pressure compensators are used in combination with other valves for pressure and flow control. The valve is normally closed by spring pressure, through flow from 1 to 2 is possible only when the control pressure at 1 is higher than the spring loading and the pilot pressure at 3. When the pressure at pilot 3 is removed, a flow from 1 to 2 is achieved provided the pressure at 1 is sufficiently high to overcome the spring force. Show more |
---|
Want to know more about the prices or order directly? This is possible when you are affiliated with a dealer in your area. Do you want to sell products via Kramp as a dealer? Then sign up!
Product | Unit | Extra info | Designed for | Flow rate | Pressure max. | Torque Nm | Note | Screw length B | Seal | Size | Total length | Wrench size other end SW2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Each | Always in combination with other valves for pressure and flow control at high volume flow and medium pressure | Always in combination with other valves for pressure and flow control at high volume flow and medium pressure. | 150 l/min | 210 BAR | 68 - 75 N·m | Intermittent switch duration, fast reaction, good flow and pressure characteristics. | 55,9 mm | Order no.: with code CP 9-4.12.006 | CP12-3S Inch | 81.3 mm | 38.1 mm | |
| ||||||