| Part number | KT1513 | |
|---|
| EAN | 5700036774436 | |
|---|
| Unit | Each | |
|---|
| Details | - Wear resistant
- Full welding on front, "chain welding" on reverse
| |
|---|
| Application range | Grip, excavator and crane shovels | |
|---|
| Technical info | - 500 HB steel can be welded either electrically or using the MIG/MAG process. It is extremely important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- For electric welding: an alkaline welding rod is recommended, but a standard welding rod can also be used
- MIG/MAG: SG3 wire is recommended, but a standard SG2 wire can also be used
| |
|---|
| Benefits | - Long service life
- Easy to replace
| |
|---|
| Long description | - Application:
- Grip, excavator and crane shovels
-
- Benefits:
- Long service life
- Easy to replace
-
- Details:
- Wear resistant
- Full welding on front, "chain welding" on reverse
-
- Technical information:
- 500 HB steel can be welded either electrically or using the MIG/MAG process. It is extremely important that the material to be welded is pre-heated to between 50 and 75°C and that the welded material is cooled in a controlled manner
- For electric welding: an alkaline welding rod is recommended, but a standard welding rod can also be used
- MIG/MAG: SG3 wire is recommended, but a standard SG2 wire can also be used
| |
|---|
| BEdge strip total width | 150 mm | |
|---|
| CMounting height | 16 mm | |
|---|
| B1Welded part width | 68 mm | |
|---|
| C1Thickness | 32 mm | |
|---|
| C2Min. working thickness | 5.5 mm | |
|---|
| Edge strip total length | 3000 mm | |
|---|
| Hardness HB | 500 | |
|---|
| Weight | 63 kg | |
|---|
| Additional info | *Please note that this item is either a dangerous good or a non-standard delivery size. This means a specialist carrier will be used and this item will take upto 48 hours to deliver. | |
|---|
