| Part number | MEC11000MSC | |
|---|
| EAN | | |
|---|
| Unit | Each | |
|---|
| Details | - The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
- MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
- MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
- A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
- Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
- A test report relating to the serial number is drawn up for each pump
| |
|---|
| Application range | The MEC II S.C. version has been specially developed as a compressor to completely empty hose reels | |
|---|
| Properties | The MEC II S.C. version can create positive pressure up to a maximum of 4 bar | |
|---|
| Technical info | - Composition of the item numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, SC = reel compressor
- Reel compressors are equipped with a forced lubrication system that is set using dripper nozzles
- The lubrication system must be checked at all times to ensure proper function
- Pumps with indirect drive (M) must be driven anti-clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
- If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
- Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
| |
|---|
| Benefits | - Minimum repair costs thanks to the unique automatic protection system
- As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
| |
|---|
| Nominal volume flow rate | 11137 l/min | |
|---|
| Drive type | PTO 540 rpm | |
|---|
| Direction of rotation | Counter-clockwise (CCW) | |
|---|
| Ballast air injection system | No | |
|---|
| Consists of | - The S. C. version features a forced lubrication system
- Including PTO shaft cover
- The pumps are delivered without lubrication oil (item BP5070)
| |
|---|
| Lubrication system type | Forced | |
|---|
| Vane type | Long life | |
|---|
| Crash protection system | Yes | |
|---|
| Max vacuum | 0.95 BAR | |
|---|
| Max. relative pressure | 4 BAR | |
|---|
| Diameter of hose connection | 2-1/2 Inch | |
|---|
| Total length | 740 mm | |
|---|
| Total width | 390 mm | |
|---|
| Height | 450 mm | |
|---|
| Mounting holes diameter | 22 mm | |
|---|
| Mounting holes distance | | |
|---|
| Mounting holes to shaft end distance | 346 mm | |
|---|
| Mounting holes to end distance | 147 mm | |
|---|
| Shaft centre to left side end distance | 195 mm | |
|---|
| Shaft centre to right side end distance | 195 mm | |
|---|
| Shaft centre to bottom distance | 69 mm | |
|---|
| Shaft diameter | 1-3/8 Inch | |
|---|
| Max. shaft rotation | 600 r/min | |
|---|
| Reservoir capacity | 3 l | |
|---|
| Weight | 133 kg | |
|---|
