| Part number | KPSB550DLA100 | |
|---|
| EAN | | |
|---|
| Unit | Each | |
|---|
| Long description | - Water cooler highly recommended for inclusion in cooling system.
- The water-cooled BPS pump is built to run continuously for a long time. This makes it ideal for e.g. large slurry tanks with injection system, vacuum trucks and industrial applications. The KPS pump is the ideal solution for professional users and contractors.
| |
|---|
| Pros | - Liquid cooled housing with integrated water pump
- Extra air cooling (BALLAST air injection system)
- Comes standard with heat-resistant "Long Life" blades
- Automatic lubrication
- The pump is suitable for continuous operation in both vacuum and pressure modes
- Crash protection system: in case of fault or blade breakage, the rotor and the rotor housing will be protected because the rotor and the mounting flange can slide away downwards
- Easy blade wear check through inspection hole with wear indication mark
- A test report by serial number is delivered with each pump
| |
|---|
| Product details | - Item number breakdown:
- KPS = Model
- B = BALLAST system, air injection
- 490, 550, 670 = Series
- D = Direct driven, 1000 rpm
- M = Drive with gearbox, 540 rpm
- P = Pulley driven
- H = Hydraulic pump driven
- L = Rotation counter clockwise
- R = Rotation clockwise
- A = Automatic lubrication
- 100 = Ø hose connection, 100mm
-
- The pump rotation is determined with the drive shaft aligned with the observer. If, for example, a pump is driven directly by a tractor, it must be driven counter clockwise.
| |
|---|
| Includes | - Pumps are delivered without oil (art. BP5070)
- Pumps are supplied without cooling radiator
| |
|---|
| Nominal volume flow rate | 15270 l/min | |
|---|
| Drive type | PTO 1000 rpm without gearbox | |
|---|
| Direction of rotation | Counter-clockwise (CCW) | |
|---|
| Ballast air injection system | Yes | |
|---|
| Lubrication system type | Automatic | |
|---|
| Vane type | Long life | |
|---|
| Crash protection system | Yes | |
|---|
| Max vacuum | 0.95 BAR | |
|---|
| Max. relative pressure | 1.5 BAR | |
|---|
| Power requirement for max. vacuum | 22 kW | |
|---|
| Diameter of hose connection | 100 mm | |
|---|
| Depression valve connection diameter | 1-1/2 Inch | |
|---|
| Shaft diameter | 1-3/8 Inch | |
|---|
| Weight | 216 kg | |
|---|
