| Part number | BALLAST16500H | |
|---|
| EAN | | |
|---|
| Unit | Each | |
|---|
| Details | - BALLAST pumps have a crash protection system (for example, this can protect the rotor and the rotor housing if a disc breaks by pushing down the rotor, including flange mounting, so that it is out of the way)
- BALLAST pumps provide longer running times in vacuum operation
- Supplied with heat-resistant "long-life" discs as standard
- The pump temperature can be read on the temperature gauge strips
- The inspection hole with maximum wear indicator allows the wear on the discs to be checked
- Battioni Pagani performs vacuum, compression and lubrication tests on all pumps before they leave the factory
- A test report is prepared for each pump by serial number
| |
|---|
| Application range | These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks | |
|---|
| Properties | These pumps can generate both positive pressure and vacuum | |
|---|
| Technical info | - Meaning of the composition of the number:
- BALLAST = series
- 16000/16500 = type
- H = hydraulically driven
-
- The BALLAST pumps have automatic lubrication installed as standard
- The lubrication is applied by the manufacturer and can not be adjusted without the proper tool
- Always check whether the lubrication is actually working when the pump is switched on
- Oil to be used for lubricating the vanes: genuine oil from B.P. Oil item number: BP5070
-
- Pumps with a hydraulic drive rotate clockwise
- The direction of rotation is determined when the axle to be driven is aligned with the observer
| |
|---|
| Benefits | - Minimum repair costs thanks to the unique automatic protection system
- As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
| |
|---|
| Nominal volume flow rate | 16800 l/min | |
|---|
| Drive type | Hydraulic | |
|---|
| Direction of rotation | Clockwise (CW) | |
|---|
| Ballast air injection system | Yes | |
|---|
| Consists of | - Without pressure relief valve (item 0250013) and vacuum valve (item 0155513)
- Without hydraulic motor and key bush
- The pumps are delivered without lubrication oil (item BP5070)
- Including hydraulic base for mounting the hydraulic motor
| |
|---|
| Lubrication system type | Automatic | |
|---|
| Vane type | Long life | |
|---|
| Crash protection system | Yes | |
|---|
| Max vacuum | 0.95 BAR | |
|---|
| Max. relative pressure | 2.5 BAR | |
|---|
| Power requirement for max. vacuum | 24 kW | |
|---|
| Hydraulic motor required capacity | 125 l/min | |
|---|
| Diameter of hose connection | 100 mm | |
|---|
| Safety valve connection diameter | 2 Inch | |
|---|
| Depression valve connection diameter | 1-1/2 Inch | |
|---|
| Max. shaft rotation | 1400 r/min | |
|---|
| Weight | 245 kg | |
|---|
