Support
Log in
Print

MEC8000P Vacuum pump pulley B.P.

Part number
MEC8000P
EAN
Unit
Each
Details
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Technical info
  • Composition of the item numbers: MEC = series, 8000 = type, P = pulley drive
  • Pumps with an "L" in the item number must be driven anti-clockwise; pumps without an "L" in the item number must be driven clockwise
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles Automatic lubrication available on request
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Benefits
As B.P. pumps are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed
Nominal volume flow rate
8100 l/min
Drive type
Pulley
Direction of rotation
Clockwise (CW)
Ballast air injection system
No
Consists of
  • These pumps are supplied with standard vanes. Long-life vanes available on request
  • Without pressure relief valve and vacuum valve
  • The pumps are delivered without lubrication oil (item BP5070)
  • Without pulley
Lubrication system type
Forced
Vane type
Standard
Crash protection system
No
Max vacuum
0.9 BAR
Max. relative pressure
1.5 BAR
Power requirement for max. vacuum
15 kW
Diameter of hose connection
80 mm
Safety valve connection diameter
1-1/2 Inch
ATotal length
690 mm
BTotal width
410 mm
CHeight
597 mm
HMounting holes diameter
15 mm
IMounting holes distance
  • 227 mm
  • 252 mm
Mounting holes to shaft end distance
268 mm
Mounting holes to end distance
170 mm
Shaft centre to left side end distance
195 mm
Shaft centre to right side end distance
215 mm
Shaft centre to bottom distance
164 mm
Max. shaft rotation
1400 r/min
Weight
152 kg
Additional info
*Please note that this item is either a dangerous good or a non-standard delivery size. This means a specialist carrier will be used and this item will take upto 48 hours to deliver.

Interested in buying products?

Want to know more about the prices or order directly? Sign up for an online account today or visit your local dealer.

Request a Kramp account
Find a Kramp dealer
  • Tailored advice from our specialists
  • Next-day delivery*
  • More than 500.000 products