Print

B.P. - MEC II / 540 rpm driven

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? Sign up for an online account today or visit your local dealer.

  • Tailored advice from our specialists
  • Next-day delivery on thousands of items
  • More than 500.000 products
Details
  • The MEC II-series pumps have an automatic protection system. So, for example, if a vane breaks, the rotor and rotor housing can be protected by the rotor—including the flange mountings—being pushed downwards
  • Pumps with a "ballast system", identified by B at the end of the item number (e.g. MEC9000MB) have a longer operating time in vacuum operation
  • The operating time at -0.95 bar lasts from 8 minutes (standard) up to a maximum of 15 minutes. Continuous operation is permissible at -0.6 bar.
  • MEC II-series pumps are supplied with long-life (heat-resistant) vanes as standard
  • MEC II-series pumps feature a temperature meter to enable the temperature to be read during operation
  • A maintenance hatch can be used to determine the wear condition of the vanes, indicating when the vanes need to be replaced
  • Each pump is subjected to a final check in the factory, in which the vacuum, compression and lubrication are tested, among other factors
  • A test report relating to the serial number is drawn up for each pump
Application range
These vacuum pumps with vanes are mainly used in agriculture for filling and emptying slurry tanks
Properties
These pumps can generate both positive pressure and vacuum
Consists of
  • Including PTO shaft cover
  • Without pressure relief valve (item 0200013) and vacuum valve (item 0155513)
  • The pumps are delivered without lubrication oil (item BP5070)
Technical info
  • Composition of the item numbers: MEC = series, 9000 = type, M = indirect drive 540 rpm, A = automatic lubrication, B = ballast system
  • On pumps without automatic lubrication (no "A" in the item number), the pump is equipped with a forced lubrication system that is adjusted using dripper nozzles
  • On pumps without automatic lubrication, the quantity of lubrication oil is set in the factory and cannot be changed without a tool
  • In the case of forced lubrication, as with automatic lubrication, the function must be checked at all times during operation
  • Pumps with indirect drive (M) must be driven anti-clockwise
  • The direction of rotation is determined when the axle to be driven is aligned with the observer
  • If the pump has a direct drive (for example, by a tractor unit) it must be driven anti-clockwise
  • Oil to be used for lubricating the vanes: genuine oil from B. P. (item number BP5070)
Benefits
  • Minimum repair costs thanks to the unique automatic protection system
  • As pumps from B.P. are tested, inspected and packaged with the utmost care, trouble-free start-up is 100% guaranteed

Interested in buying products?

Want to know more about the prices or order directly? Sign up for an online account today or visit your local dealer.

  • Tailored advice from our specialists
  • Next-day delivery on thousands of items
  • More than 500.000 products