Rod seals PU

Name: Rod seals PU
Rating: 4.6 (31 reviews)

Browse to product table

Interested in buying products?

Want to know more about the prices or order directly? Sign up for an online account today or visit your local dealer.

Long description	The cuffs made of polyurethane have a symmetrical profile, i.e. the sealing lips are the same length. This design allows these cuffs to be used for both rod and single-acting piston seals.
Pros	Highly flexible and easy assembly in closed room Very good oil resistance High tensile strength High wear resistance Suitable for both rod sealing and piston sealing
Product details	Seal for double-acting and single-acting cylinders Temperature range: -30°C to 100°C Material : polyurethane Symmetrical profile Max. 400 bar Series U type PU seals are replaced by Series SA-UN seals Types 605 and 663 have an asymmetrical profile* and are therefore only suitable for sealing piston rods. So never mount on a piston! Type 601 has a symmetrical profile* and is therefore suitable for both piston rod sealing and piston sealing. Asymmetrical profile: the inner lip is shorter than the outer. Symmetrical profile: both the inner and outer sealing lips are the same height. For an application specifically as a piston seal, please refer to type ZA-UN under piston seals.
Properties	Highly flexible and therefore easy to install in enclosed chambers Highly oil-resistant High tensile strength High level of wear-resistance Suitable for use as a piston rod seal or piston gasket seal

Want to know more about the prices or order directly? Sign up for an online account today or visit your local dealer.

Product	Unit	Type	Inside diameter d	Outside diameter D	Groove thickness E	Width H	Max. working pressure	Max. sliding speed	Min. working temperature	Max. working temperature	Material	Type code
Hallite U9511012 Rod seal 110x95x12mm Hallite	Each	Rod seal	95 mm	110 mm	13 mm	12 mm	400 BAR	1 m/s	-45 °C	110 °C	Polyurethane	605

Type	Inside diameter (millimetre)	Outside diameter (millimetre)
Rod seal	95	110